Showing posts with label gadget. Show all posts
Showing posts with label gadget. Show all posts

Friday, October 2, 2020

Starting Out as a Computer Tech (part 4)

 I want to take a break from the software side of things, let's talk about hardware. Quite frequently when I am replacing a screen or a keyboard on a laptop/Chromebook or something to that effect, I get asked why I am breaking it. New techs are always so delicate and skittish when preforming such tasks. As a result, they can be mind-numbingly slow and often get frustrated because something seems stuck or just won't go back in place. While what you may have to do will vary on different hardware, there is one thing to keep in mind. If something is already broken, don't sweat breaking it more.


Take replacing a Chromebook screen for example. Often times it is a flat connector on the back, four screws holding it in place, and a glued down plastic front trim with occasional screws. To get the old screen off, you have to pry off any screw covers, remove screws, then more or less rip off the front. It may sound like it is breaking, but the screen is already being replaced so just yank the plastic front off. When you are sitting there prying away you will here plastic clips pop, glue pull apart, and it will require force. There is also be force required to put it back together. Just do it, do not worry about breaking things worse. After a while you will get the hang of it, but you have to not be afraid. The first screen I had to replace I had someone walk me through each step. After that initial shock of "I have no idea what I'm doing" it was all fine. Parts after that I just figured out how to do on my own.


Printers are another item you most likely at some point need to take apart. When taking printers apart, they often have brightly colored plastic bits for you to grab on to and unclip. Maintenance kits also often come with instructions of how to replace rollers and such. While printers are a bit more delicate, it really takes some effort to break things. The simple thing with them is if it does not give with a decent pull or push, you're probably doing it wrong.


Any hardware repair you need to make, there is a good chance there is a video online of exactly how to do whatever you need to do. If you want to have some knowledge before hand, just search on whatever video service you like how to do what needs to be done.


When working with batteries, be careful. Lithium ion batteries that have swelled up contain stuff you do not want to breath in and can potentially be inflammable. They also have a potential to shock your equipment and make things worse, so be aware of the contacts. Also make sure battery disposal meets your state requirements. Most people do not know this, but you are not supposed to just toss batteries in most states (not that that stops anyone). Select places may offer battery recycling.


Projectors are another item you may need to deal with some hardware, like replacing a lamp. A few warnings around these. The first is to make sure it is unplugged. I have gotten shocks from exposed heat sinks on cheap projectors. The second is to make sure the lamp remains intact as these can contain mercury. There is also a risk for broken glass and glass shards, so take necessary precautions especially on ceiling mounted projectors.


Whenever you work with any hardware, there are things you should remain aware of. Make sure to go through a mental checklist.

  • Is it on?
  • Is it plugged in?
  • Are there sharp objects or exposed metal?
  • Is there an order I need to do things in?
  • Do I have all the tools I need?

 

Now there are precautions other people use that I often disregard because either I have never had an issue or just do not care. Here's a few of those, why you should do it and why I don't care.

Wear an electro-static bracelet to ground yourself. Static shocks can damage equipment very badly, this could help prevent that. I do not use these because they are stupid and I'm usually grounded from touching everything else to get to repairing something. I have also never managed to see a static shock go from me to a circuit board even when I try.

Wear gloves. You may want to wear gloves when working with toner getting in places or other stuff you do not want on you. Maybe you just do not want to get other people's germs. I generally stick to not touching toner if it's exposed and if I touch a remote with my bare hands, it doesn't get much worse.

Keep water away from electronics. If there is power, water will short the board. I usually have things with no power source connected and I've honestly washed circuit boards before with soap and water (long story with my dishwasher). If there is no power when wet and dry when turned on, you should be fine. Even if there is power, it usually works after you turn it off and dry it off before trying to turn it back on.


There are a lot of other things to keep in mind, but there is a lot to consider. The bottom line with hardware is read manuals, watch videos, and don't be nervous. Things are not as fragile as most books and manuals make them out to be.


Tuesday, May 29, 2018

Tech Review: EC Technology Foldable Bluetooth Keyboard (A40-BT002)

Due to work, I often find myself emailing from my phone or desperately trying to find a computer and spending the extra time to log in and get to my email just to type with a real keyboard. This is because I move around between multiple locations and am often on someone else's computer that may or may not work, and I also don't necessarily want to log into my email on someone else's account. Worst case scenario involved pecking at my phone screen or swiping around in feeble attempts to get everything spelled out correctly. Often times names, brand names, special characters, or various technobabble leads to horribly written emails with at least one typo. This is far from ideal, so I finally caved in and got a Bluetooth keyboard.

The one I settled on was the EC Technology A40-BT002. My main draw to this was the covers over the hinges. I don't like exposed ribbon cables or cables crammed into a joint as I tend to damage those quite often. The device is also cased in aluminum, so should be pretty durable and it also makes it feel like quality. The dimensions are pretty good, it is like a stockier shape of my Pixel XL in a Lifeproof case. I actually got that case to keep crap out of the ports because the rubber plugs I had purchased got lost too often. So it's a little shorter, wider and roughly the same thickness, not enough difference to notice. When it is open, it's a good size for people with normal sized hands, mine are rather large but I have to type on chromebooks from time to time and it's fairly similar. It holds itself open very well, the hinges are so low profile they are almost completely unnoticeable. All things considered, it's a really solid design.

The way it folds up, the hinges are right on the staggering of the keys, so the main part of the keyboard remains proportionate and the seem between is very easy to miss if you're not looking. It has all the keys I need, as I also like to play around with Termux on my phone. The biggest problem I have is the size of the shift key on the right and the tab key. I keep accidentally hitting the up arrow and tab is virtually non-existent compare to the other keys. I'd say it has a learning curve to get used to for full-speed typing. Luckily, I type slow normally.


To use this on a computer, you will need to use the Windows layout to use the Home, End, Page up, and Page down keys. Unfortunately, it won't let me use the Windows key as the Super key when in Virtualbox, it just uses it as the Command key on Mac. While on a Mac, switching to IOS let's me use some of the other functionality like Volume up and down.

Now I've only had it for a few days, but I am quite happy with the purchase. It looks good, feels like quality, and types well enough for a quick email or messing around with Termux. It's also nice to not lose half the screen just to type. This makes split-screen apps on Android actually useful since the screen won't resize just to type. Now I just need a solution for carrying around everything for EDC, because at work I just use my Fallout NCR messenger bag. Anyone think fanny packs are in?

Monday, October 23, 2017

Tech Review: Rexing V1P

Due to driving an hour to get to work, an hour to get home, and drive between buildings at work, I supposed it best to get a dash cam. Not to mention getting rear-ended on my way in to work not more than a few months ago. So after browsing around, I settled on the Rexing V1P for the low price and additional rear camera. I got the camera itself without doing real in-depth research, a fatal flaw of mine to jump on a reasonable price and good ratings. So here's my review after a week of owning one.

The first thing to note is that you need loop recording enabled because after an email from Rexing, you can only have a 4GB single file, which is roughly 40 minutes. No major drawback there, and having the separate 10 minute files is easier to find events. If you let it hit the 4GB file, it tells you the SD card is full and stops recording. I was also advised to avoid a SanDisk Ultra SD card, after I bought one with it because Amazon recommended it. So far, I haven't had any real problems with it, but I figured I would mention it. They recommend some Lexar SD card.

So the part I think is most important, is installation. I've now installed one in a 2010 Toyota Prius and a 2016 Toyota Rav4. Installation itself is super easy, I just did the normal charger as apposed to a hardwire because I'm still a little nervous about what the actual impact would be as far as the fuses itself and I already hard to replace a fuse for a plug and USB adapter. Now the installation was very easy, but of course it depends on your car. With both cars, I was able to pull paneling away and pop the gasket out of the runs to get the wires behind everything, including behind the airbag. I was worried if I put it in front of the airbag, it could cause a problem. To drop the power to a plug, I dropped it behind the glove box where there's already an exposed hole. To get the rear camera wire from door to door required getting a rigid wire and some tape.

To attach the front camera, rather than stick it on the windshield and worry about the 3M pad getting wrecked by the sun and heat in Georgia or needing to replace it if the windshield needs to be replaced, I bought the suction cup mount. All seemed well, but there was one final problem. My windshield has a low angle and I'm over 6ft tall. The screen has a low angle viewing and I can only seem to manage a high angle.

Despite the random problems I've run into, I've been very happy with the camera. Now I'll tack on some video for the front and rear with an example of why I need a dash cam. I pulled some clips from the front and rear for both the daytime and night/early morning.


So as a final rating for the dash cam... I would say it's great for the price with a simple install.

Friday, June 19, 2015

Gadget Review: Fitbit Charge HR

I had originally purchased the Fitbit to monitor my sleep. Suffering from insomnia during the summer and also finding out that sometimes I appear to wake in a panic and don't remember doing so, I figured monitoring my sleep could reveal something. I have not had it for too long, however there are some things I feel the need to talk about with it.

Now the first thing to note is physically how it is wearing it. The material is rubbery but no discomfort with the band. The actual metal buckle cut into my wrist one night when I fell asleep on it. The rubbery texture means it's pure hell if moisture gets under it. The actual heart beat monitor on it likes to leave a square indent no matter how loose I make it, if I make it any looser it would slide too much and get really annoying. All in all, about as comfortable as any Casio I'd wear if I wore watches.

The screen itself is good, bright and readable. The single button to cycle through everything is mildly annoying if I bump past the screen I wanted.

Now as far as the tracking goes, let's start with the heartbeat monitor. It seems good, although sometimes I question its accuracy. The pedometer is very inaccurate. It's set to being on my dominant hand and it still registers any up-down movement as a step seemingly nine times out of ten. The monitor for stairs, there are no describable words for how terrible it is. I can run up and down a ladder or stairs or do steups and get no change. Meanwhile I know someone who never uses any stairs and can go up 10 flights of stairs in a day. When it comes to monitoring calories burned, some days it seems very high, other days it seems very low. So I couldn't even guess if there is any real accuracy there.

Now another thing to talk about is the distance measuring. This is guessed based off of your steps and the stride length (I never entered that information because because). This means that is is as accurate as the pedometer. So I walk about a mile every morning laying in bed petting my dog. Enough said.

Now the automatic sleep monitor. According to stuff online, it determines when you fall asleep by a lack of movement and low heart rate. Seems accurate enough. It also logs "restless sleep." This is when you move a little from tossing and turning. If you sleep with someone else, these logs can look very similar. It can also log if you "wake up." This can also appear if you sleep with someone who disturbs the bed enough when they wake up and you're still asleep. I would venture to guess this is about the best it can do on accuracy and it seems rather accurate for me.

There is also an activity log based on the heart rate monitoring. This means anything that gets your heart going counts as activity, be it exercise, an exciting movie, video games or porn. So there's that.

Now it also comes with a way to sync to your computer and to your phone. The computer uses a dongle and the phone uses bluetooth. So I don't bother syncing anything unless I get curious otherwise the bluetooth would kill my phone too quickly and bluetooth security is not really the greatest thing in the world.

Now aside from the automatic tracking and graph generations, it also includes basically a food journal, exercise log, water intake log and weight log. I don't use any of these because I am not going to take my phone out every time I want to eat, drink or exercise. If I were really interested in that, I would more than likely write it down by hand. But I'm not so I don't. I won't go on a rant about dietary needs (even though I do in real life whenever I hear the word diet), but a food journal isn't really necessary unless you have a real medical reason for needing to know. Plus, seeing I eat McDonalds, pizza rolls, ramen and every candy I get my hands on won't change me doing all those things. I'm 6'2" and 160 lbs and have been for eight years. So take that. Also, drink water when you're thirsty and exercise for about 15 minutes a day and you'll be perfectly healthy. Hrumph.

Now that that is out of my system, let's move on to the stuff that actually genuinely irritates me. First, I cannot remove "goals" from the thing. I don't care how many steps I take, floors I go up, calories I burn or water I intake. There are no steps in my house but it won't let me remove that or set it to zero. I just don't have any goals for any of that because I don't care. I was curious about the sleep monitoring, enjoy the heart rate graphs every now and again, but that is it. Let me be lazy without this whole goal overtone. The actual app design is okay and the website is okay as well. It's easy enough to use. One feature I think would be nice is to have an alarm set a certain number of hours after it registers you falling asleep.

Speaking of, I forgot about the silent alarm. It works for me because I'm a light sleeper. The sound of the vibration motor is enough to wake me up. Doesn't work so well for heavy sleepers, though.

At the end of the day, I would say it is an annoying novelty that might be interesting to people really into working out and dieting, but does very little in the way of leading to a healthier lifestyle. Oh, and if you're curious, I have taken about 50 steps in the process of typing this. As far as has it helped me figure anything out about my sleep... well it just lets me know I sleep consistently badly.